Floating guillotine-style weir
Easy through-wall installation (requires only one round hole to mount)
Easily accessible basket
Skimmer has easily accessible cartridge
Dimensions: 7" wide x 11.6" tall x 2.5" deep (front to back) Existing concrete ponds require core drilling
Top of unit mounts a mere 1 1/2" above water level of the pond making it a stealthy installation
For ponds up to 500 gallons
Maximum flow rate of 500 GPH; minimum flow rate of 300 GPH ; making it ideal for smaller ponds
Requires a 7" wide relatively flat spot on the side wall of your pond
On liner ponds, a 1 1/2" bulkhead type fitting on the back of the skimmer attaches to your liner. A simple stainless steel bolt and fender washer assembly secures the top of the base plate in place.
Much stealthier than our D18703 skimmer - no reaching out into the pond or pipes visable.
Model available for new concrete ponds.
Strip Skimmer (model for liner or fiberglass ponds)
Keep Your Pond Water
Surface Pristine- Easily retrofit existing pond with
this skimmer unit; effectively removes floating leaves from the
surface. Has large basket strainer capacity. Float weir allows
varied pond water level. 1 1/2" bottom threaded port.
suction from intake side of a pump to operate.
Minimum flow rate 800 GPH. Maximum
flow rate 1500 GPH
Requires a 1 1/2" minimum
side wall or floor port to "tap into" suction side
A rigid or flexible liner can
be retrofitted to use this skimmer by adding a bulkhead fitting
to the wall or floor of a pond. For proper positioning in pond,
Float ring weir has up to 5 1/2"
of vertical travel to allow for water level changes; ie: filter
backflushes, water changes and waves created by waterfall. See
Dimensional Illustration below:
Skimmer has a 1 1/2" NPT
female thread in the bottom of the skimmer for suction line hook
Skimmer with black basket and improved heavy duty handle